KB 626274 - Re-Activating Windows 11 Pro After a Motherboard Replacement

KB 626274 - Re-Activating Windows 11 Pro After a Motherboard Replacement

Overview

After a motherboard replacement, Windows may show a message such as "Windows is not activated" because it no longer recognizes your computer's hardware. You can usually fix this yourself in 10 to 30 minutes by following the steps below.
Your files, apps, and settings are not affected. Until Windows is activated, it keeps working, but you may see a watermark in the corner of the screen, and some personalization options are locked.
Work through the fixes in order and stop as soon as Windows shows Active.

Before you start

Have these four things ready, and keep the computer plugged in and connected to the internet throughout.    
  1. Your Windows 11 Pro product key. It is 25 characters (five groups of five) and is usually on a sticker on the computer, on a card in the box, or in your purchase email
  2. Your Microsoft account email and password, if you signed in to Windows with one.
  3. A working internet connection. A network cable is more reliable than Wi-Fi.
  4. Your invoice or the service report we gave you after the repair, in case you need to contact Microsoft.
You must be signed in as an administrator. If you are unsure, use the account you normally use to install programs.

Fix 1: Check your activation status.

Windows sometimes activates by itself once it is online, so check this first.

  1. Connect the computer to the internet and restart it once.
  2. Select Start, then Settings, then System, then Activation.
  3. Look at the activation state.
    1. Active: you are done. Go to "Confirm it worked."
    2. Not active: continue to Fix 2.

Fix 2: Run the activation troubleshooter.

This lets Windows re-link your license to the repaired computer if it is connected to your Microsoft account.  
  1. Go to Settings, then System, then Activation.
  2. Select Troubleshoot. This button only appears when Windows is not activated.
  3. Choose "I changed hardware on this device recently."
  4. Sign in with the Microsoft account you use on this computer.
  5. Pick this computer from the list, tick "This is the device I'm using right now," and then select "Activate."
If your computer is not listed, or you see a message that Windows cannot be activated, continue to Fix 3.

Fix 3: Enter your original product key.

Use the 25-character key that came with your Windows 11 Pro license.
  1. Go to Settings, then System, then Activation.
  2. Next to Change product key, select Change.
  3. Type your 25-character key carefully and select Next.
  4. Select Activate and wait for the confirmation message.
Use only the key that came with your own license. Keys from websites, other computers, or unknown sellers will not work and may be blocked.
If you see an error code, note it down and check the table under "Common error messages," or continue to Fix 4.

Fix 4: Activate by phone

Use this if online activation fails or your key has been used on too many devices. The call is automated and takes about 10 minutes.

  1. Press the Windows key + R, type slui 4 and press Enter.
  2. Choose your country or region and select Next. The screen shows a toll-free number and a long installation ID.
  3. Call the number and follow the voice prompts. Read out the installation ID when asked.
  4. The system gives you a confirmation ID. Type it into the boxes on the screen.
  5. Select Activate Windows.

If the automated line cannot activate Windows, choose the option to speak to a Microsoft support representative and explain that your computer's motherboard was replaced because of a fault.

Fix 5: Route B-CLI. Activation using slmgr (command line)

Use this route instead of the Settings screens when Route B fails to open, the Settings page is unavailable, or you need output that can be pasted into the ticket. It is the same license action as Route B, run from the command line.

  1. Right-click Start and select Terminal (Admin) (or open Command Prompt as administrator).
  2. Check the current state and note the output: slmgr /dlv then slmgr /xpr.
  3. Only if a wrong or temporary key was installed earlier, remove it: slmgr /upk, then slmgr /cpky. Skip this step otherwise.
  4. Install the original OEM key: slmgr /ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX. Wait for the message "Installed product key ... successfully".
  5. Activate online: slmgr /ato. Wait for "Product activated successfully."
  6. Verify: slmgr /xpr should report "The machine is permanently activated," and slmgr /dli should show Windows 11 Pro with the status "Licensed."
  7. Restart the system once and re-check slmgr /xpr.

Phone activation with slmgr (no internet, or /ato fails):

  1. Make sure the key is installed (step 4 above).
  2. Run slmgr /dti and note the installation ID.
  3. Call the Microsoft activation number shown by slui 4 for your country, and read out the Installation ID.
  4. Enter the Confirmation ID returned: slmgr /atp <ConfirmationID> (digits only, no spaces or dashes).
  5. Verify with slmgr /xpr and slmgr /dli.

If slmgr shows an error, record the code, check it against Section 8, and run slmgr /rilc to reinstall the license files if the error mentions corrupt or missing license files. Then repeat steps 4 and 5. If the key is rejected, try changing the product key to XXXXX-XXXXX-XXXXX-XXXXX-XXXXX as an alternative, then move to Route C or D.

 

Confirm it worked.

Windows is fixed when the activation page reads "Active" and the watermark disappears.

1. Go to Settings, then System, then Activation. The activation state should read Active.

2. Press the Windows key + R, type winver, and press Enter. It should say Windows 11 Pro.

3. Restart the computer once. The "Activate Windows" watermark should be gone.

4. Take a photo or screenshot of the activation page and keep it with your invoice.

Common error messages

Find the code shown on screen in the table and follow the action next to it.

Error code

What it means

What to do

0xC004F211

Windows noticed a hardware change.

Use Fix 2, then Fix 3 or Fix 4.

0x803F7001

No license found for this computer

Use Fix 2, or Fix 3 with your original key.

0xC004F050

The key is not valid for this edition.

Check that you typed the Windows 11 Pro key correctly, then try again.

0xC004C003

The key has been blocked.

Contact us or Microsoft Support (see below).

0xC004C008

The key was used on too many devices.

Use Fix 4 (phone).

0xC004F213

Windows found no key stored on the computer.

Use Fix 3 with your original key.

0x80072F8F, 0x80072EFD, or 0x80072EE7

Internet, date, or time problem

Check the internet connection and that the date, time, and time zone are correct, then try again.

 

You can also contact Microsoft Support at support.microsoft.com/contactus, or use the Get Help app in Windows, and explain that your motherboard was replaced due to a hardware fault.


Warning

Please do not:

  1. Reinstall Windows or reset the computer. It will not fix activation and may delete your data.
  2. Use free keys, "activators," or tools from the internet. They are illegal, often contain malware, and can cause the key to be blocked.
  3. Share your product key with anyone you do not trust.